1、成品电线经受交流50HZ,10KV电压试验5min,不击穿。
Finished cable shall endure A.C. 50HZ and 10KV voltage test for 5 min without puncture.
2、电线经受热收缩试验,收缩率应不**过2%。电线表面应不出现裂纹。
Cable shall endure heat shrinkable test; shrinkable ratio shall be no more than 2%; no cracks appear on the surface of cable.
3、电线经受燃烧试验合格。
Cable shall be qualified to withstand burning test.
4、绝缘电阻每米不小于5MΩ。
Insulated resistance per meter shall be no less than 5MΩ.
5、注意事项Notes:
施工时严格防止电缆损伤,降低产品性能。
Cable damage and performance reduction are strictly prevented during installation.
6、交货要求 Delivery requirement:
成品电缆允许根据双方协议长度交货;长度误差不**过±5%。
Delivery length of finished cable depends on both agreements with length error allowance of ±5%.